Receiver Board + ESC (2-in-1) for QIDI 580 SR22 (OEM Replacement)

Restore clean, reliable control and power delivery to your QIDI 580 SR22 with this factory-style 2-in-1 receiver board with integrated ESC. It’s a direct drop-in replacement for the stock unit—no soldering required.

Key Features

• 2-in-1 design: flight receiver/flight-control functions with integrated brushless ESC

• Plug-and-play ports for motor, servos, battery and aux—matches the stock harness

• Direct-fit mounting with pre-aligned holes; compact, lightweight PCB

• Pre-tuned to suit the stock QIDI 580 SR22 control throws and behavior

• Ideal for crash repair, intermittent power issues, or electronics refresh

Compatibility

• Model: QIDI 580 SR22 RC Airplane

• Works with the stock brushless motor, servos and transmitter (bind as usual)

• Need other spares? Explore the QIDI 580 SR22 Spare Parts collection.

What’s in the Box

• 1× Receiver board with integrated ESC (OEM-style replacement)
  Note: Motor, servos, battery, frame and screws are not included unless shown in photos.

Installation Tips

1. Remove the propeller and disconnect the battery before any work.

2. Note wire routing from the old board; connect to the new board’s labeled ports.

3. Secure the PCB to the mount; use foam tape or screws to minimize vibration.

4. Bind to your transmitter following the stock procedure.

5. Perform a low-throttle test to confirm correct motor direction; swap any two motor leads if rotation is reversed.

6. Verify all control surfaces move in the correct direction before flight.

Specifications

• Type: Integrated receiver + brushless ESC board

• Motor Output: 3-phase brushless (for the stock SR22 motor)

• Connectors: Pre-soldered battery/motor/servo ports matching the factory harness

• Fit: Direct replacement for QIDI 580 SR22

Warranty & Shipping

• Protected by our 3-month warranty against manufacturing defects.

• Worldwide shipping available.