Pular para as informações do produto
1 de 1

Kidstoylover

VolantexRC Sport Cub 500mm Rear Tail Wheel for 4CH RC Trainer Plane

VolantexRC Sport Cub 500mm Rear Tail Wheel for 4CH RC Trainer Plane

Preço normal Dhs. 43.00 AED
Preço normal Preço promocional Dhs. 43.00 AED
Promoção Esgotado
Frete calculado no checkout.

VolantexRC Sport Cub 500mm Rear Tail Wheel  for 4CH RC Trainer Plane


Restore Smooth Ground Taxiing, Prevent Tail Drag Damage, and Maintain Three-Point Balance

A missing, bent, or broken rear tail wheel on your VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane causes the rear fuselage and rudder to drag directly against rough tarmac or grass during takeoff rollouts and landings. Hard tail-first landings, tall grass snags, or transport bumps can easily snap the rear wire strut or pop off the tiny tail wheel. Flying without an intact rear tail wheel wears down the bottom tail foam, compromises directional ground tracking, and leads to awkward ground loops before liftoff. This official VolantexRC Sport Cub 500mm Rear Tail Wheel assembly provides an exact factory replacement. Featuring a durable spring-steel wire strut and lightweight miniature tail wheel, it restores proper three-point ground stance, smooth runway tracking, and tail-section protection.  Ships worldwide.


Compatibility

For the VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane only.
Full model page (specs & photos):

https://kadstoylover.com/products/volantexrc-sport-cub-500mm-4-channel-rc-trainer-airplane


What’s in the Box

  • 1 x  VolantexRC Sport Cub 500mm Rear Tail Wheel

More Spare Parts & Accessories

Find exact-fit props, wheels, landing gear, servos and more in the dedicated parts collection: 


Product Highlights

  • Exact Factory Geometry: Molded and bent to match original Sport Cub 500mm (761-4) specifications for proper tail height and rudder clearance.

  • Resilient Spring-Steel Wire Strut: Absorbs tail-strike impacts during beginner landings without snapping or bending permanently.

  • Ultra-Light Low-Drag Wheel: Keeps rear tail weight to an absolute minimum to preserve the aircraft's factory Center of Gravity (CG) while rolling smoothly on paved runways.

  • Tail Foam & Rudder Protection: Elevates the lower rear fuselage and rudder hinge above asphalt and dirt to prevent abrasion during taxiing.


Install Tips

  • Removing Damaged Tail Wheel: Carefully pull or unseat the bent wire strut from the rear tail mounting slot at the bottom of the fuselage.

  • Cleaning the Mounting Hole: Clear any sand, grass debris, or loose foam fragments from the rear tail socket before fitting the new assembly.

  • Inserting the Replacement Tail Wheel: Align the mounting end of the VolantexRC Sport Cub 500mm Rear Tail Wheel into the rear fuselage slot and press firmly until seated securely (apply a tiny drop of foam-safe glue if the foam socket has loosened from prior crashes).

  • Pre-Flight Rudder & Spin Check: Move the rudder left and right to ensure full, unrestricted control surface movement and verify the rear wheel spins freely before takeoff.


Support & Warranty

  • 3-month warranty on manufacturing defects
  • Ships worldwide
Ver informações completas
1 de 4