The Flywing BELL-204 ACE RC Helicopter solves complex scale-helicopter setups, unstable hovering, and return-to-home worries by combining BeiDou and barometric altitude assist with H-ACE flight control, one-key/low-battery return, and a three-speed flight feel. Inspired by the 1956 Bell Model 204 (UH-1 / XH-40) utility helicopter, its scale paintwork, rivets, panel lines, transparent canopy, and two-blade metal rotor head bring classic aviation realism to open-field flights.
Key Features
Effortless Hover & Multi-Mode Flight: Supports BeiDou positioning and barometric altitude hold for drone-like hovering, alongside ATT, 6G, Freedom, and coordinated turn modes.
Quick-Release Blades & NACA 8-H-12 Airfoil: Uses a second-generation FBL all-metal CNC two-blade quick-release rotor head with custom NACA 8-H-12 flat-convex blades for low-speed lift and easy blade swaps.
3 Flight Speeds & Auto Flight Paths: Switch directly on the RC02 transmitter between low, standard, and high flight feel, and fly circular or figure-8 horizontal paths with a 15-meter diameter per circle.
Smart Return & 16V Brushless Power: Features one-key return and configurable low-battery return (default is low-battery forced landing; enable and set return voltage in the transmitter), paired with a 16V brushless motor system and custom tail rotor for up to 22 minutes of flight time.
RC02 Telemetry & On-Screen Tuning: Offers 5 telemetry screen styles, voice alerts in 5 languages (Chinese, English, Japanese, German, French), log playback, and direct parameter/model tuning without a PC.
Who It’s For
Scale helicopter fans who want UH-1 / BELL-204 details, panel lines, rivets, and a two-blade metal rotor head.
Pilots who want BeiDou altitude/position assistance, soft takeoff and landing, and one-key return in open outdoor areas.
Hobbyists who want to adjust flight feel, pitch limits, or modes directly on the RC02 screen without connecting a PC.
Pilots choosing a ready-to-fly bundle with one or two flight batteries.
What’s in the Box
Flywing BELL-204 ACE helicopter and main rotor blades
FY-RC02 telemetry transmitter and balance charger
One or two 4S 5000mAh LiPo flight batteries, depending on the bundle selected
User manual
Specs
Model: UH-1 / BELL-204 ACE
Dimensions: Length 82 cm (side view), Skids/Body span 74 cm, Height 22 cm, Width 17 cm, Rotor/Top span 93 cm
Servos: Metal gear servos with coreless motor, 4KG.CM torque, 0.12sec/60° speed, flat gear design
Power & Flight Time: 16V brushless power system, brushless tail motor with custom tail blade, up to 22 minutes flight time
Safety Protection: One-key return to home; configurable low-battery return (default: low-battery forced landing without RTH)
Transmitter & Telemetry: RC02 transmitter with 5 telemetry styles, voice broadcast & display in 5 languages (Chinese, English, Japanese, German, French), log playback, direct parameter/model adjustment
Flight Battery: 4S 5000mAh
Note: Images show sample features
Scale Flying Highlights
Classic Bell 204 / UH-1 styling with crisp rivets, panel lines, clear canopy, and scale livery.
Smooth, coordinated turns and soft takeoffs/landings that look natural in the air.
BeiDou hover stability, 15m circle/figure-8 auto paths, and one-key return for confident outdoor flying.
Practical 16V brushless endurance (up to 22 minutes) and instant parameter tweaks right on the RC02 transmitter.
Installation & Maintenance Tips
Quick-Release Rotor Blades: Align and lock the quick-release nylon blades into the second-generation FBL all-metal CNC two-blade rotor head before flight, checking that the latch is secure.
Battery & Low-Battery RTH Setup: Install the 4S 5000mAh LiPo battery, and if you want low-battery return instead of default forced landing, enable it and set a sufficient return voltage in the transmitter.
RC02 Transmitter & Mode Switch: Power on the RC02 transmitter, verify telemetry connection and compass calibration if needed, and customize the ACRO switch (Attitude, 6G, or Manual mode) in the menu before takeoff.