K300 Landing Gear Replacement Skid Assembly for Brushless RC Helicopter
Protect Tail Rotors, Absorb Hard Inverted Flight Impact, and Prevent Fuselage Scratches
Rough landings, emergency auto-rotations, and fast inverted maneuvers often place heavy stress on a helicopter's landing support frame. A cracked, bent, or missing landing skid leaves the lower tail rotor motor, main gear assembly, and bottom gyro electronics vulnerable to direct impact with dirt, asphalt, and grass. Continuing to fly with compromised landing legs can cause severe fuselage friction on takeoff or lead to tipping over during high-speed ground runs. This official K300 Landing Gear replacement skid set restores crucial ground clearance and shock absorption. Designed as a direct factory replacement, it safely elevates internal components, absorbs landing energy during aggressive 3D stunt practice, and keeps your helicopter steady on uneven launch surfaces. Ships worldwide.
Product Highlights
Shock-Absorbing Molded Nylon: Constructed from tough, flexible composite material that flexes under heavy impacts to cushion hard touchdowns and inverted flight drops.
Factory-Matched Mounting Geometry: Pre-formed mounting posts align perfectly with the original chassis screw holes without requiring extra drilling or modification.
Elevated Ground Clearance: Keeps main gears, battery compartment, and tail rotor blades well off the ground to prevent dirt and debris ingestion.
Lightweight Aerodynamic Profile: Adds minimal weight to the overall airframe, preserving dual-brushless motor performance and agile inverted flight dynamics.
Compatibility
For the K300 RC Helicopter only. Full model page (specs & photos):
Removing Damaged Skids: Gently back out the mounting retaining screws from the bottom of the main frame and detach the cracked original landing skid.
Aligning & Securing Posts: Place the K300 Landing Gear assembly onto the underside of the chassis, line up the mounting holes, and tighten the retaining screws evenly without over-torquing.
Battery Strap & Wire Route Inspection: Ensure the battery retention harness and lower motor cables rest cleanly above the landing skid struts without pinching.
Level Surface Test: Set the helicopter down on a flat, level floor to verify that all skid pads sit flush, ensuring rock-solid stability during spool-up and takeoffs.
Spare Parts & Accessories
Find remote control，battery，USB，carcase clips，screwdriversand more in the dedicated parts collection
