KF17 Front C-Hub Carrier Set M06035 for 1:12 4WD Brushless RC Truck
Eliminate Steering Wobble, Restore High-Speed Stability, and Repair Front Impact Damage
A cracked, snapped, or worn front C-hub carrier on your KF17 1:12 Brushless RC Truck severely compromises steering precision, causes excessive wheel slop, and can force drive shafts to dislodge during high-speed 70km/h off-road runs. The front C-hubs absorb high torsional stress during sharp turns and harsh jumps; when damaged or fatigued, steering response becomes sluggish or completely binding. Attempting to glue broken composite hubs or forcing mismatched aftermarket parts into the front suspension arms leads to improper kingpin geometry and uneven tire wear. This official KF17 Front C-Hub Carrier (Part #M06035) set completely resolves front-end structural and steering slop issues. Precision-molded to original factory specs, it restores rigid steering knuckle positioning, razor-sharp response, and high-impact front chassis durability. Ships worldwide.
Product Highlights
High-Impact Composite Construction: Molded from heavy-duty, impact-resistant polymer built to withstand high-speed bash impacts and rough landing shocks.
Precision Factory Steering Alignment: Maintains exact kingpin angles and caster geometry for crisp, stable high-speed tracking at 70km/h speeds.
Complete Left & Right Front Set: Includes a matched pair of M06035 front steering C-hub carriers to refresh or repair both sides of the front suspension.
Direct Drop-In OEM Replacement: Features pre-molded hinge pin sleeves and steering knuckle mounting holes for a seamless, bolt-on installation.
Removing Damaged Front Hubs: Remove the front wheels, unbolt the steering knuckles and tie rods, then pull the inner hinge pins to release the damaged C-hubs from the suspension arms.
Mounting Replacement C-Hubs: Position the new KF17 Front C-Hub Carrier (M06035) into the front suspension arm slot, align the hinge pin holes, and slide the hinge pin through smoothly.
Reattaching Steering Knuckles & Linkages: Seat the steering steering block inside the C-hub, install the kingpin screws evenly (do not overtighten), and reconnect the steering pushrods.
Pre-Flight Steering Alignment Inspection: Turn on the transmitter and vehicle, turn the front wheels left and right to full lock, and verify smooth, bind-free movement across the entire suspension stroke.
