Main Landing Gear Wheels Set with Fairings for VolantexRC 761-5 P-51 Mustang

End Rough Runway Nose-Overs, Fix Broken Wheel Doors, and Maintain Authentic Scale P-51 Takeoff Lines

For the 500mm VolantexRC 761-5 P-51 Mustang warbird, executing clean, scale-accurate landings on hard asphalt or short grass tracks requires perfectly straight tracking wheels. Due to the high speed of the brushless motor variant, a heavy landing impact or a sudden crosswind tumble can easily bend the internal steel struts, loosen the wheel hub pins, or shatter the decorative plastic gear door fairings. Operating your aircraft with bent or asymmetrical landing gear causes the plane to pull sharply to one side during taxiing, often leading to immediate tip-stalls or wing-tip scrapes on takeoff. This factory-original main landing gear kit replaces your damaged wheel assemblies instantly, absorbing landing energy efficiently while preserving the legendary profile of your P-51 Mustang.  Ships worldwide.

Product Highlights

• Scale-Authentic Red & Yellow Gear Fairings: Features pre-installed plastic landing gear doors painted in vibrant red with a yellow center racing stripe, matching the classic P-51 warbird trim.

• High-Tensile Anti-Deformation Steel Struts: Built around premium spring steel wires hidden inside the fairings that provide exceptional structural rigidity while allowing minor flex to cushion hard touchdowns.

• Low-Drag Treaded Black Rubber Wheels: Equipped with durable, lightweight foam rubber tires featuring simulated spoke hubs that rotate freely on concrete, dirt, or packed runways.

• Direct Plug-In Left/Right Symmetrical Pair: Packaged as a complete matching set of 2 main gear units to allow a complete simultaneous overhaul of your front drivetrain for balanced rolling alignment.

Compatibility

For the VolantexRC 761-5 P-51 Mustang 500mm RC Airplane Brushless 4CH RTF Warbird only.
Full model page (specs & photos):

https://kadstoylover.com/products/volantexrc-761-5-p-51-mustang-rc-airplane-brushless-4ch-rtf-warbird

What’s in the Box

• 1 x VolantexRC 761-5 Landing Gear Set

Install Tips

• Removing the Damaged Gear Units: Firmly grasp the old bent metal strut at the wing root base and pull it straight outward from the molded plastic mounting block inside the main EPP foam wing underbelly.

• Aligning and Seating the New Steel Struts: Identify the left and right units by matching the aerodynamic curve of the red-and-yellow fairing plates; insert the top L-shaped steel pin tip directly into the dedicated wing-socket channel.

• Securing the Friction Lock Engagement: Press the wire upward firmly until the strut seat clicks securely into the molded retention recess, ensuring the decorative doors face forward toward the nose cowl.

• Pre-Flight Rolling and Tracking Alignment Calibration: Place the warbird on a flat table or level floor track; look from the front tip to verify that both wheels stand vertically parallel with zero twisting. Gently roll the plane forward by hand to ensure it tracks perfectly straight before throttling up into your next brushless flight run.

More Spare Parts & Accessories

Support & Warranty

• 3-month warranty on manufacturing defects
• Ships worldwide