Skip to product information
1 of 1

Kidstoylover

VolantexRC Sport Cub 500mm Front Landing Gear Wheel for 4CH RC Trainer Plane

VolantexRC Sport Cub 500mm Front Landing Gear Wheel for 4CH RC Trainer Plane

Regular price 52.00 SAR
Regular price Sale price 52.00 SAR
Sale Sold out
Shipping calculated at checkout.

VolantexRC Sport Cub 500mm Front Landing Gear Wheel for 4CH RC Trainer Plane


Restore Smooth Ground Rollouts, Absorb Hard Landings, and Protect the Prop & Fuselage

A bent wire strut, missing wheel, or cracked plastic retainer on your VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane makes smooth runway takeoffs impossible and risks nosediving into the ground during landings. Rough grass touches, beginner hard landings, or transport pressure can easily deform the wire landing gear or dislodge the foam tires. Flying without properly aligned front landing gear exposes the propeller and lower fuselage belly to direct ground strikes, leading to broken props and motor shaft damage. This official VolantexRC Sport Cub 500mm Front Landing Gear set provides a direct factory replacement. Built with spring-steel wire struts and shock-absorbing lightweight foam wheels, it restores clean ground steering, upright stance, and reliable runway protection.  Ships worldwide.


Compatibility

For the VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane only.
Full model page (specs & photos):

https://kadstoylover.com/products/volantexrc-sport-cub-500mm-4-channel-rc-trainer-airplane


What’s in the Box

  • 1 x  VolantexRC Sport Cub 500mm Front Landing Gear 

More Spare Parts & Accessories

Find exact-fit props, wheels, landing gear, servos and more in the dedicated parts collection: 


Product Highlights

  • High-Elasticity Spring-Steel Struts: Engineered to flex and absorb shock upon rough beginner landings without snapping or permanently bending out of shape.

  • Lightweight Shock-Absorbing Foam Tires: Ultra-light high-density foam wheels reduce rolling friction on paved surfaces and short grass while keeping overall flight weight minimal.

  • Direct Factory Snap-In Fit: Designed to slot cleanly into the lower fuselage mounting bracket of the Sport Cub 500mm (761-4) without requiring glue or airframe modifications.

  • Propeller & Fuselage Clearance Protection: Maintains proper nose-up ground angle to keep the spinning propeller safely clear of tarmac and grass debris during taxiing.


Install Tips

  • Removing Damaged Landing Gear: Gently pinch or unclip the bent wire strut from the underside fuselage mounting slot of your Sport Cub 500mm.

  • Inspecting the Mounting Bracket: Ensure the plastic bottom fuselage retainer slot is clean and free of dirt or foam debris before inserting the replacement part.

  • Snapping New Landing Gear into Place: Align the top wire ends of the VolantexRC Sport Cub 500mm Front Landing Gear with the fuselage socket and press firmly until the clip locks securely.

  • Pre-Flight Alignment & Roll Check: Place the plane on a flat surface to verify both wheels sit level and spin freely without rubbing against the wheel hubs before takeoff.


Support & Warranty

  • 3-month warranty on manufacturing defects
  • Ships worldwide
View full details
1 of 4