VolantexRC Sport Cub 500mm Front Landing Gear Wheel for 4CH RC Trainer Plane
Restore Smooth Ground Rollouts, Absorb Hard Landings, and Protect the Prop & Fuselage
A bent wire strut, missing wheel, or cracked plastic retainer on your VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane makes smooth runway takeoffs impossible and risks nosediving into the ground during landings. Rough grass touches, beginner hard landings, or transport pressure can easily deform the wire landing gear or dislodge the foam tires. Flying without properly aligned front landing gear exposes the propeller and lower fuselage belly to direct ground strikes, leading to broken props and motor shaft damage. This official VolantexRC Sport Cub 500mm Front Landing Gear set provides a direct factory replacement. Built with spring-steel wire struts and shock-absorbing lightweight foam wheels, it restores clean ground steering, upright stance, and reliable runway protection.Ships worldwide.
Compatibility
For the VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane only. Full model page (specs & photos):
High-Elasticity Spring-Steel Struts: Engineered to flex and absorb shock upon rough beginner landings without snapping or permanently bending out of shape.
Lightweight Shock-Absorbing Foam Tires: Ultra-light high-density foam wheels reduce rolling friction on paved surfaces and short grass while keeping overall flight weight minimal.
Direct Factory Snap-In Fit: Designed to slot cleanly into the lower fuselage mounting bracket of the Sport Cub 500mm (761-4) without requiring glue or airframe modifications.
Propeller & Fuselage Clearance Protection: Maintains proper nose-up ground angle to keep the spinning propeller safely clear of tarmac and grass debris during taxiing.
Install Tips
Removing Damaged Landing Gear: Gently pinch or unclip the bent wire strut from the underside fuselage mounting slot of your Sport Cub 500mm.
Inspecting the Mounting Bracket: Ensure the plastic bottom fuselage retainer slot is clean and free of dirt or foam debris before inserting the replacement part.
Snapping New Landing Gear into Place: Align the top wire ends of the VolantexRC Sport Cub 500mm Front Landing Gear with the fuselage socket and press firmly until the clip locks securely.
Pre-Flight Alignment & Roll Check: Place the plane on a flat surface to verify both wheels sit level and spin freely without rubbing against the wheel hubs before takeoff.
Power loss and a flashing light on your standard C138? Start with these battery and connection checks, then see what information to send support before flying again.
Power loss and a flashing light on your standard C138? Start with these battery and connection checks, then see what information to send support before flying again.
Compare the QIDI-590 and MoFly MF-X7 by transmitter layout, flight modes, battery packages and prices. Named reviewers’ observations and linked sources explain which differences matter before you buy.
Compare the QIDI-590 and MoFly MF-X7 by transmitter layout, flight modes, battery packages and prices. Named reviewers’ observations and linked sources explain which differences matter before you buy.
The new 6-Channel dual-brushless RC ERA C180 BO105 has taken the community by storm. We dive into the real user comment sections to answer your top questions—from switching between Mode...
The new 6-Channel dual-brushless RC ERA C180 BO105 has taken the community by storm. We dive into the real user comment sections to answer your top questions—from switching between Mode...