A missing, bent, or broken rear tail wheel on your VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane causes the rear fuselage and rudder to drag directly against rough tarmac or grass during takeoff rollouts and landings. Hard tail-first landings, tall grass snags, or transport bumps can easily snap the rear wire strut or pop off the tiny tail wheel. Flying without an intact rear tail wheel wears down the bottom tail foam, compromises directional ground tracking, and leads to awkward ground loops before liftoff. This official VolantexRC Sport Cub 500mm Rear Tail Wheel assembly provides an exact factory replacement. Featuring a durable spring-steel wire strut and lightweight miniature tail wheel, it restores proper three-point ground stance, smooth runway tracking, and tail-section protection.Ships worldwide.
Compatibility
For the VolantexRC Sport Cub 500mm 4-Channel RC Trainer Airplane only. Full model page (specs & photos):
Exact Factory Geometry: Molded and bent to match original Sport Cub 500mm (761-4) specifications for proper tail height and rudder clearance.
Resilient Spring-Steel Wire Strut: Absorbs tail-strike impacts during beginner landings without snapping or bending permanently.
Ultra-Light Low-Drag Wheel: Keeps rear tail weight to an absolute minimum to preserve the aircraft's factory Center of Gravity (CG) while rolling smoothly on paved runways.
Tail Foam & Rudder Protection: Elevates the lower rear fuselage and rudder hinge above asphalt and dirt to prevent abrasion during taxiing.
Install Tips
Removing Damaged Tail Wheel: Carefully pull or unseat the bent wire strut from the rear tail mounting slot at the bottom of the fuselage.
Cleaning the Mounting Hole: Clear any sand, grass debris, or loose foam fragments from the rear tail socket before fitting the new assembly.
Inserting the Replacement Tail Wheel: Align the mounting end of the VolantexRC Sport Cub 500mm Rear Tail Wheel into the rear fuselage slot and press firmly until seated securely (apply a tiny drop of foam-safe glue if the foam socket has loosened from prior crashes).
Pre-Flight Rudder & Spin Check: Move the rudder left and right to ensure full, unrestricted control surface movement and verify the rear wheel spins freely before takeoff.
Identifiziere deinen schwarzen Ranger 600 Stunt 4CH, wähle die passende Lade- oder Akkuoption und prüfe die Propellerhalterung, bevor du ein Ersatzteil bestellst.
Identifiziere deinen schwarzen Ranger 600 Stunt 4CH, wähle die passende Lade- oder Akkuoption und prüfe die Propellerhalterung, bevor du ein Ersatzteil bestellst.
Stromausfall und eine blinkende Anzeige bei Ihrem Standard C138? Beginnen Sie mit diesen Akku- und Verbindungsprüfungen, und erfahren Sie dann, welche Informationen vor dem nächsten Flug an den Support gesendet...
Stromausfall und eine blinkende Anzeige bei Ihrem Standard C138? Beginnen Sie mit diesen Akku- und Verbindungsprüfungen, und erfahren Sie dann, welche Informationen vor dem nächsten Flug an den Support gesendet...
Vergleichen Sie den QIDI-590 und den MoFly MF-X7 hinsichtlich Sender-Layout, Flugmodi, Akku-Paketen und Preisen. Beobachtungen von benannten Testern und verlinkte Quellen erklären, welche Unterschiede vor dem Kauf wichtig sind.
Vergleichen Sie den QIDI-590 und den MoFly MF-X7 hinsichtlich Sender-Layout, Flugmodi, Akku-Paketen und Preisen. Beobachtungen von benannten Testern und verlinkte Quellen erklären, welche Unterschiede vor dem Kauf wichtig sind.
Die neue 6-Kanal-Dual-Brushless-RC-Fernsteuerung ERA C180 BO105 hat die Community im Sturm erobert. Wir haben uns die Kommentare echter Nutzer genauer angesehen, um eure wichtigsten Fragen zu beantworten – vom Umschalten...
Die neue 6-Kanal-Dual-Brushless-RC-Fernsteuerung ERA C180 BO105 hat die Community im Sturm erobert. Wir haben uns die Kommentare echter Nutzer genauer angesehen, um eure wichtigsten Fragen zu beantworten – vom Umschalten...